The Konica Minolta KM1024 MHB print head has an integrated heater making it ideal for UV inks but also suitable for solvent inks. This print head is used for IIJ MonoPrint 352, SwissQprint Impala, Orbotech Inkjet Legend etc.
Condition NEW
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
100% Original & New Konica KM1024 MHB 14PL UV Printhead On-Demand Piezo Electric
NEW Konica KM1024 MHB 14PL UV Printhead Use For Docan 2510 UV and Scorpion 3300 INNO-UV SE Printers
The Konica Minolta KM1024 MHB print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale.
The Konica Minolta KM1024 MHB print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
The Konica Minolta KM1024 MHB print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi, Technology On Demand Piezo Electric (Shared Wall 3 Cycle).
Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 MHB reduces power consumption even further. The print head has an integrated heater, which makes it ideal for UV inks, but suitable for solvent inks as well.
ORIGINAL Konica Minolta KM1024 MHB 14PL printhead. This printhead is covered by a factory warranty
Specifications: Technology:On-Demand Piezo Electric (Shared Wall 3 Cycle) Native Resolution:360 dpi Cal. Droplet Size:14 pico litre Max. Drops in Greyscale:8 drops Tot. Amount of Nozzles:1024 (512 nozzles per line) Nozzle Spacing:70.5 microns Print Width:72 mm Firing Frequency:12.8 kHz Ink Compatibility:UV and Solvent Inks Heater:integrated Made In Japan
Used for
Dilli Neo Titan UV 1604DS Neo Titan UV 1604DW UV LED Flatbed
The Konica Minolta KM1024 MHB print head has an integrated heater making it ideal for UV inks but also suitable for solvent inks. This print head is used for IIJ MonoPrint 352, SwissQprint Impala, Orbotech Inkjet Legend etc.
Extend the life of your thermal printheads through regular cleaning with a thermal cleaning pen. Specially designed to help remove buildup caused by the thermal printing process. Wasp Barcode offers a complete line of replacement thermal printheads specifically designed to work with our complete line of barcode label printers. Wasp 633809003301 Thermal Print Head 600 Dpi WPL618 printers.
